SEARCH




LOG IN

User Name:

Password :


JTC Auto special tools

JTC-1007

MECHANIC STETHOSCOPE

Headset to examine the sound of the engine if it works well or not, and to find out if there was a strange sounds inside the engine or not


JTC-1022

ENGINE SLING CHAIN SET

Chains kit to lift the engine with the accessories


JTC-1039

BATTERY TESTER

Battery tester helps to increase the lifespan of the battery


JTC-4084

BELT INSTALLING TOOL SET

Special designed set of tools for installing the new blew into the pulley
Applicable : Ford, MAZDA, VOLVO, BMW, Chrysler, Citroen, Fiat, Lancia and etc.


JTC-4600

TWO WAY OIL FILTER WRENCH

Special designed to remove and install the oil filter easily and quickly.
With pull spring to make it hold the filter easily.


JTC-1040

ANTI-FREEZE TESTER

device used to check the quality of water cooling in radiator (Antifreeze) and boiling and freezing temperatures


JTC-1141

TWO SETS BEARING SEPARATOR KIT

Bearing separator 9000 & 9005 include & pull out the bearing with the H-type beam and bolts


JTC-1601

OIL FILTER WRENCH

Hardened drop forged CR-V steel tool removes stubborn filters 60m/m up to 90m/m.
Slip joint design makes adjustment fast & easy.


JTC-1602

OIL FILTER WRENCH

Hardened drop forged CR-V steel tool removes stubborn filters 85m/m up to 115m/m.
Slip joint design makes adjustment fast & easy


JTC-1945

OIL FILTER WRENCH-60mm

Professional oil filter wrench unique “Swivel-Handle” design allows adjustable band to rotate 180 degrees, to reach tight areas. Full range of sizes of fit sub-compact to truck filters.
Parts are heat-treated for strength and durability and all wrenches feature vinyl grips


JTC-1949

EXTENDING VALVE STEM SEAL PLIERS

Designed to reach into confined area for removal of valve seal.
Serrated tip for better grasp of valve seal regardless of its configuration.


JTC-4800

TWO WAY OIL FILTER WRENCH

Special designed to remove and install the oil filter easily and quickly
With pull spring to make it hold the filter easily


JTC-5628

BRTTERY TERMINAL & ALTERNATOR BEARING PULLER

Special design to remove and replace the battery terminal and alternator bearing. One-touch push open jaw


JTC-1212

CLIC-R COLLAR PLIERS

special design for CV ear type clamps , for releasing and refitting reusable hose clip , for type clic and clic-R


JTC-1243

DEEP VALVE SEAL REMOVER

This model of remover is special designed to fit the deep valve , Maximum:23φ & maximum depth :217mm . T handle with ON-OFF function for stronger grasp of seal & Patent.



JTC-1252

VALVE COLLET REMOVER

 Full length: 160mm . Designed to remove the valve collet quickly and easily.The body is with magnetic. When you hit the tool to the valve spring, the collet will be attracted by the magnetic. Patent


JTC-1256

ENGINE OIL PRESSURE TESTER

Designed to check engine oil pressure in both cars and trucks. Easy to read dual scale gauge. Complete with 24” (600mm) of oil proof hose with 1/8” NPT. Also includes 1/4” NPT and 3/8” NPT adapters. Dual gauge readings: 0 to 300 psi (0 to 21 bar).Gauge diameter: 2.5”


JTC-1261

METAL CASE BATTERY BRUSH

Designed for cleaning the battery terminals & You can use on both sides


JTC-1304

VALVE SPRING COMPRESSOR

Used for Car & Motorcycle.Pusher size: 16mm, 19mm, 23mm, 25mm, and 30mm.
5pcs pusher for fitting the valve spring correctly and easier to compress the valve spring.

JTC-1312A

ADJUSTABLE FUEL TANK LID REMOVER

Jaw adjustable range:122~199mm,suitable for different fuel tank lid.Special jaws design to remove & install the tank closely.․Use with 3/8" DR. Wrench․Patented.


JTC-1315

OIL PAN SEPARATOR TOOL

Wide, tapered, round blade edges between metal surfaces to break gasket seals on engine pumps, transmissions or any difficult to separate gasket joints.Blade width:1-7/8" (48mm) & Length:3-1/8" (78mm)


JTC-1341

FLUID LINE CLAMPER SETS

Special designed to stop the fluid flow without damaging the hose.Applicable: 13411 - 10mm (3/8") & 13412 - 15mm (5/8" & 13413 - 25mm (1") & 13414 - 45mm (1-3/4")



JTC-1401

HEAVY DUTY COIL SPRING COMPRESSOR

Hook engage spring which can be compressed by turning hex nut. Jaws capacity: 23mm~280mm & Length: 280mm


JTC-1414

7PCS COOLING SYSTEM TESTERS

to test water tank and density of water tank cover. Applicable for  Mercedes, GM (Buick), Jeep, Peugeot, Subaru,Chrysler, Acura, GM (Nova,Spectrum, Sprint), Mitsubishi,Nissan, Mazda, Toyota, Infiniti, Geo, Suzuki, Isuzu, Ford Honda


JTC-1449

COMBINATION ELECTRONIC STETHOSCOPE KIT

To locate and identify noise and enable road test diagnosis.Super sensitive microphone pick up. Defect & isolate noisy components. & Contents: Flexible non-conductive sha Cushioned headphones 4 channel sensor selector unit 4 pick up sensors-4.8mm ling cords


JTC-1452A

POSITIVE & NEGATIVE CALIPER WIND BACK KIT

More adapters than 1613A for using on more new model vehicles. Two bodies with positive thread and negative thread for different models.& the Total is 21 pcs


JTC-1501

JTC-1501 CHISEL SCRAPER KNIFE

This heavy duty blade is designed with a chisel edge.1-1/4" (32mm) wide blade & 7-1/2'' (190mm) OAL

JTC-1503

CV BOOT CLAMP INSTALLER

Installs low-profile clamps used to hold CV boots on most FWD vehicles.
Ratcheting action & built-in cutter to tighten the clamp quickly and properly.


JTC-1608

SEAL PULLER

Removes oil & grease seals. & Two tips fit most application.


JTC-1621A

UNIQUE COMPRESSION TESTER KIT

Diameter 70mm gauge, with rubber covered.Provide calibrations 0-300psi, 20kg/cm , 20bar.380mm steel wire insert hose with 12, 14, 18mm adapter.200mm aluminum tube, with rubber plugs in the front


JTC-1704

ELERTRIC CIRCUIT TESTER

Power on type tests 6,12 and 24 volt circuits .For wire breaks, short, fuses, lamps, relays armatures, etc.
75mm inspection probe with point cover.
120cm long 16# wire with alligator clip.


JTC-1730

5PCS HOOK & PICK SET

Stainless steel points.& Set contains awl, hook tool, 45° & 90° bent too
& Use for detail works and scribing, picking jobs


JTC-1936

CYLINDER HEAD BOLT TOOL

The 100mm length allows easy access to recessed head bolts and Comes with 1/2” drive for use with a torque wrench.Use for TOYOTA Tercel cylinder head bolt.


JTC-1942

TWO WAY OIL FILTER WRENCH

Removes all oil filters from 2-1/2” to 4” in diameter. Use with 1/2” square drive tool.
 Size: range 2-1/2” – 4” (63-102mm)


JTC-1946

OIL FILTER WRENCH-73mm

Professional oil filter wrench unique “Swivel-Handle” design allows adjustable band to rotate 180 degrees, to reach tight areas. Full range of sizes of fit sub-compact to truck filters.
Parts are heat-treated for strength and durability and all wrenches feature vinyl grips


JTC-2110

UNIVERSAL CLUTCH ALIGNMENT SET

This tool makes the alignment and assembly of clutch and Specially designed for those vehicles equipped with late-model front wheel drives without
pilot bearing in flywheel.
Size: small cone: range 14.4~21mm
large cone: range 20.9~29mm


JTC-3118

WINDOW HOLDER

Hold up the window glasses while working regulator.Durable rubber can hold article over 12kgs / per piece.and the disc dimension is 56mm.


JTC-3202

AIR IMPACT WRENCH (UNDER EXHAUST)

Free speed: 7000 rpm ,Bolt capacity: 3/4" ,Air inlet: 1/4" ,Air pressure: 90-120psi
Torque: 460 ft/lb ,Weight: 2.63kgs and Overall length: 7-3/8" (187mm)


JTC-3207

IMPACT DRIVER SET

Bits. Material:S2.
Contents:
4 Bits x 36mml:PHILLPS ⊕ NO.2, NO.3
SLOTTED θ8m, 10mm
28 Bits x 80mml:PHILLPS ⊕ NO.2, NO.3


JTC-3305

HAND GREASE GUN

With release valve for easier operation. Large handle with rubber for labor saving.
Special oval-shaped design on tank puller and Capacity: 400 c.c.


JTC-3509

POWER BIT SET

Material:S2


JTC-35164

JAWS GEAR PULLER

The jaws on this gear puller can be changed to operate with 2 or 3 jaws with internal or external pulling action.Simply unscrew the knurled screw cap to release spring
and jaw cover, unhook the jaws and replace as necessary.Replace cover plate and tighten spring with knurled screw.Keep clean and well oiled between uses.
Always use eye protection when using this gear puller.


JTC-3925

STAR SCREWDRIVER SET (TAMPER PROOF)

Chrome molybdenum steel with heat treated blade & magnetic tip . Special design with hole in the head to fit the special screws
Contents:
T8H x 100mm, T9H x 100mm, T10H x 100mm, T15H x 125mm, T20H x 125mm,
T25H x 125mm, T27H x 150mm, T30H x 150mm, T40H x 150mm.


JTC-4040

EXTRA LONG OXGEN SENSOR SOCKET

For removing and install lambda sensors with a deep-seated hexagon
Particulary suitable for the MERCEDES-BENZ C/E, 602, 605,
606 VW/ AUDI/ SKODA/ SEAT, BMW, FORD, OPEL, ROVER, VOLVO
MATERIAL:CR-MO STEEL
1/2" DR. length:150mmL
Size:22mm x 6PT x 150L


JTC-4061

ASSORTMENT OF INJECTOR COPPER GASKETS

Universal copper gaskets with 15 different size combinations are suitable for most of popular nozzle of injector system.
Size:13.85x7.3x1.4, 14.6x7.5x1.3, 14.6x7.5x3, 15x7x2,
15x7.5x1, 15x7.5x1.5, 15x7.5x2, 15x7.5x2.5, 15x17.5x3,
15.5x7.5x2, 16x7.5x1.5, 16x7.5x1.7, 16x7.5x2, 16.4x7.4x2,
20x9.4x0.9
Total: 150pcs, 10pcs for each size


JTC-4085

CAMSHAFT PULLEY LOCKING TOOL

Special designed 4 columns to fix the camshaft pulley.and Attached with another extra long column for wider camshaft pulley.Applicable for most models of vehicle


JTC-4094

VW, AUDI 6PCS SOCKET SET- 12PT

Specially designed for using in suspension striuts , brake , calipers , transmission ccrews, oil screws and wheel bearing area etc.. of
VW, AUDI group.
Contents: 4pcs 1/2" Dr. x78mmL :M12, M14, M16, M18
1pcs 14mm hex Dr. x M14 30mm L
1pcs 17mm hex Dr. x M16H 32mm L (tamperproof)


JTC-4098

EXTRA LARGE INNER TIE ROD TOOL

The master tie rod tools easily replaces inner tie rod ends without removing the rack & pinion.
Large size than JTC-1839
Capacity: 40~47mm


JTC-4159

ADJUSTABLE FUEL TANK LID REMOVER

Jaw adjustable range:148~199mm.
Special designed for removing the holes type fuel tank lid.
Patented designed to use for symmetrical holes type & 5 or 7 holes type fuel tank lid.
Use with 1/2 " DR. or 21mm wrench.
Applicable: NISSAN, BMW, BENZ, VW, AUDI, etc.
Patented


JTC-4196

LED HEAVY DUTY ELECTRIC CIRCUIT TESTER

Dual color LED indicates red for power (high) and green for ground (low).
Heavy-duty probe.
6'(1.8m) long heavy-duty 18 gauge dual leads with battery clips and spring strain relief.
High-impact plastic body.
High impedance tester protects computer circuitry.
Services 6, 12, 24 Volt systems.


JTC-4289

FEELER GAUGE (STRAIGHT)

Length: 89mm (3.5 inch), width: 12.8mm.
Metric size: start from 0.01 to 0.63 mm
Inch size:start from 0.0015 to 0.025 in


JTC-4622

THIN TYPE TWO JAWS BRARING REMOVER

Special design for removing the bearing in narrow space.Working depth: 93mm Jaws thickness: 1.5mm .Applicable bearing dimension: Φ30~90mm


JTC-4641

BEARING PACKER

To pack grease into bearing by easily compressing. To add grease from the grease fitting in the top or removing the body.
Applicable: bearing max. I.D.??16mm and max O.D.95mm.


JTC-4675

ENGINE TIMING TOOL SET - CITROEN & PEUGEOT

This comprehensive set of tools enables the correct engine timing to be made when replacing the timing belt. Applicable: Citroen and Peugeot 


JTC-4724

HEAVY DUTY CHAIN OIL FILTER WRENCH

Available for all type of oil filter.Flexible handle for narrow space.
Size available:60mm-160mm.Length of chain:520mm
Handle is adjustable with 180 , length G185mm


JTC-4776

FLOW METER COMMON RAIL SET

To measure rapidly and effectively the amount of fuel that every
injector returns to the deposit tank, so that you will find if any
injector is damaged.
Possibility of simultaneous of up to 6 injector
JTC-4777 is optional for varies different sdapters.


JTC-4808

SEAL PULLER SET

Quickly and easily remove O-ring or grease and oil seal.Special angle on the tool head provides a better work that the traditional seal pullers.
3 different lengths and tips fit nearly all applications.Simple insert the tool tips, press and pull. Length : 117/165/150 mm


JTC-4899

EXTRA LONG INTERNAL SPARK PLUG RETHREAD TOOL

Special designed for chasing spark plug threads from inside the cylinder head and working outward . Use the good threads at the base of port
Reduced dirt and metal debris from being driven into the cylinder head


JTC-4904A

TOYOTA OIL FILTER SOCKET

Special designed for plastic oil filter cap of TOYOTA.It is easier to use in limited space.Use with 1/2"Dr. tool or 21mm wrench.
Material:Made of steel, high quality.Size:64.5mm, 14PT


JTC-4943

FUEL HOSE PULLER

Special specification to meet type of adaptor.To remove the fuel hose adapter easily.
Applicable:FORD, MAZDA, and GM, etc.


JTC-4944

VALVE KEEPER REMOVER AND INSTALLER KIT

Special designed for using on all engines with overhead valves.
Valve springs will not be bended or loosen. Works on gas or diesel engines.
Fits most overhead valve applications.
Magnet in tool body captures keepers for quick removal and valve disassembly
Quickly removes and installs valve keepers on most overhead valve engines.
Works on valve stems from 4.5 to 7.5mm and 5/16" to 3/8".


JTC-5625

MINI PANEL REMOVER SET

Special design with an extra slim profile and unique shape for the delicate task of removingsmall or fine fascia trim and bezels.
Made from impact resistant high quality nylon to prevent scratch or mar fascia like metal tools made. Applicable: Air vents, door panels, door locks, electronic seat controls, seat levers, center counsels,gear shifters, etc….


JTC-F0416

BALL JOINT SEPARATOR (18mm)

Tempered drop forged steel one piece construction for long & rough usage.
21/32"(18mm) Fork, 16"(410mm) length replace worn out tie rods easily with a hammer striking. Also can separate shock absorber links



JTC-5706

STUD REMOVER

Capacity- ¼” to ¾”
Welded Body & made of middle carbon steel.
and Availability- Metric Size


JTC-3322

HANDY REMOVER SET

For plastic upholstery fasteners.
Place tool under edge of door panel and insert into fastener as fast as possible,
and then simply pry up.Large support area to protect clips and pad


JTC-3822

AIR DIE GRINDER

Free speed: 22000 rpm
Collet size: 6mm (1/4")
Air inlet: 1/4"
Air pressure: 90psi
Air consumption: 350 L / min
Net weight: 0.6kg
Overall length: 175mm
Exhaust system: Rear


JTC-4860

AIR CV BOOT INSTALLATION TOOL

Innovative tool saves time, money and frustration.
Installs flexible steering and CVJ boots without removing
axle from the vehicle or the CV joint from the axle. No effort and no mess!
Material : Aluminum steel
Capacity : φ20~110 mm
Air pressure : Max 9Bar (125psi)


JTC-5301

MINI AIR IMPACT WRENCH

Max torque: 500 ft/lb.
Net weight: 1.36 kg.
Length: 99 mm.
Air Consumption: 0.2 m3/min.
Air Inlet: 1/4" inch.
Vibration: 2.8 m/g2.
Speed: 11,000 RPM.
Mechanism: jumbo hammer.


JTC-5335

PLASTIC CASE AIR IMPACT WRENCH (800LB)

Max torque: 800 ft/lb.
Free speed: 6800 rpm.
Air consumption: 5.3 cfm.
Air inlet: 1/4”.
Overall length: 170mm.
Weight: 1.89 kgs.


JTC-4737

DIESEL GLOW PLUG SOCKET SET

Special designed easy removal and replacement of glow plugs.
3/8" Dr ., 6 point type
Contents:Universal socket 8, 9, 10, 12, 14, 16mm
Extension bar 3/8" x 3"(JTC-3607)
Socket length: 83mm


JTC-5823

MULTI POSITION PRY BAR (short)

Ideal for prying seals, bearings, manifolds, oil pans, axles,
drive shafts, fuel injectors.Indexing head can adjust 14 fixed angles
Push design for quick release pry head and easy lock to fixed angles


JTC-5824

MULTI POSITION PRY BAR ( long )

Ideal for prying seals, bearings, manifolds, oil pans, axles,
drive shafts, fuel injectors.
Indexing head can adjust 14 fixed angles
Push design for quick release pry head and easy lock to fixed angles



<< back

Coca-Cola Street No.15- Industrial Zone -Ramallah-WestBank-Palestine
TEL: 00970 2295-5408- FAX: 00970 2295-2609
Email:info@alnabali-ltd.com , info@nasco-ltd.com
website:www.alnabali-ltd.com , www.nasco-ltd.com